





Customize
Spark I-100: IP video door station.
A slim single-button door station with a colourful wide-angle lens, an NFC card reader and a bold round call button, built for homes, villas and small buildings.
Everything the front door needs. Nothing it doesn't.
One call button, one camera, one card reader, in a compact aluminium-grey housing that's easy to install and easy to use.
- 2 MP, wide angle: A wide view of whoever is at the door.
- Night vision: Infrared LEDs for clear images after dark.
- Full-duplex talk: Both sides speak at once, like a phone call.
- NFC unlocking: Tap an NFC card on the reader to open the door.
- Motion and human detection: Picks up movement and people at the door.
- PoE or DC: One cable for power and data, or a DC 12 to 15 V supply.
Press the bell. See, talk, open.
The visitor presses the call button and the indoor monitor on the same network rings. The resident sees them, talks in full duplex and taps Unlock to open the door.
- Clear by day: 2 MP camera with a wide viewing angle.
- Clear by night: Infrared LEDs light the scene after dark.
- Motion and human detection: Detects movement and people in front of the door.
- Status indicators: IR LEDs and lens indicators confirm power and call state.
Tap a card. You're home.
Residents unlock with an NFC card at the reader. Cards are added and removed from the indoor monitor, and deleting a card only affects that household, never the neighbours.
- Add cards: Put the station in add mode from the indoor monitor, then tap each new card.
- Remove cards: Delete one card, swipe several in delete mode, or clear them all.
- Two lock outputs: Lock 1 (NO / NC) and Lock 2, for electric or magnetic locks.
- Exit buttons: A door-release button input for each lock.
- Door-open alarm: A door-contact input for each lock.
- Lock power: Power the lock from the station's own lock output (VL+).
One network cable. Two ways to power it.
Power the I-100 over PoE on the same network as the indoor monitor, or give each unit its own supply and link them with a Cat5 cable. It configures itself by DHCP.
- Cabling: Cat5 / Cat5e under 50 m to the indoor monitor, and RVV 2×1.0 under 10 m for the lock.
- Mounting: Surface mount with the wall bracket, camera at eye level.
- Set from inside: Unlock time, ring and call volume and motion sensitivity are set from the indoor monitor.
- On the back: RJ45 port, volume adjustment and a factory reset button.
Specifications
| General | |
|---|---|
| Type | IP outdoor station |
| Camera | 2.0 MP |
| Night vision | Infrared compensation LEDs |
| Intercom | Full duplex |
| Unlocking | NFC card, from the indoor monitor |
| Card reader | NFC |
| Operating system | Linux |
| Network | RJ45, DHCP |
| Power and environment | |
| Power | PoE or DC 12 to 15 V / 1 A |
| Working current | Max 300 mA at DC 15 V |
| Standby power | < 1.5 W |
| Working temperature | -10 °C to +55 °C |
| Detection and wiring | |
| Motion detection | Yes |
| Human detection | Yes |
| Lock outputs | Lock 1 (NO / NC), Lock 2 |
| Inputs | Exit button + door contact per lock |
| Installation | Surface mount |
| Cabling | Cat5 / Cat5e < 50 m · lock RVV 2×1.0 < 10 m |
In the Box
- Door station
- Wall mount
- NFC cards ×2
- 7-pin, 5-pin and 2-pin cables
- Anchors and screws ×4
- Box screws ×2
- User manual

























